|
|
 |
BASCOM-8051
BASCOM-8051© is a Windows BASIC COMPILER
for the 8051 family.
It is designed to run on W95/NT and has all the features of
BASCOM LT.
plus full support for arrays and the single floating point type.
Key Benefits
- Structured BASIC with labels.
- Compiled programs work with any 8051 uP such as
AT89C1051, AT89C2051, 8031, 8032, 8051, 8052, 80552, 80535 and 80537.
- Integrated simulator for testing.
- Integrated terminal emulator with download option..
- Integrated flash programmer and support for SPI,
PG2051, PG302, SE512, SE514, TAFE. (hardware can be purchased
separately)
- Structured programming with IF-THEN-ELSE-END IF,
DO-LOOP, WHILE-WEND, SELECT- CASE.
- Fast machine code instead of interpreted code.
- Variables and labels can be as long as 32 characters.
- Bit, Byte, Integer, Word, Long, Single and String
variables.
- Statements are highly compatible with Microsoft’s
VB/QB.
- Special commands for LCD-displays , I2C
chips and 1WIRE chips.
- Editor with statement highlighting.
- Context sensitive help.
- For compatibility with BASCOM LT, there is also a
32-bit version of the BASCOM LT compiler.
The following statements are supported :
- Decision and structures
-
IF, THEN, ELSE, ELSEIF, END IF, DO, LOOP, WHILE, WEND, UNTIL, EXIT DO, EXIT
WHILE, FOR, NEXT, TO, DOWNTO, STEP, EXIT FOR, ON .. GOTO/GOSUB, SELECT, CASE.
-
-
Input and output
-
PRINT, INPUT, INKEY, PRINTHEX, INPUTHEX,
LCD, UPPERLINE, LOWERLINE,DISPLAY
ON/OFF, CURSOR ON/OFF/BLINK/NOBLINK, HOME, LOCATE, SHIFTLCD LEFT/RIGHT,
SHIFTCURSOR LEFT/RIGHT, CLS, DEFLCDCHAR, WAITKEY, INPUTBIN, PRINTBIN, LCDHEX,
OPEN, CLOSE, DEBOUNCE, SHIFTIN, SHIFTOUT.
-
-
Numeric functions
-
AND, OR, XOR, INC, DEC, MOD, NOT, ABS, BCD.
-
-
I2C
-
I2CSTART, I2CSTOP, I2CWBYTE, I2CRBYTE, I2CSEND and I2CRECEIVE.
-
-
1WIRE
-
1WWRITE, 1WREAD, 1WRESET.
-
- SPI
-
SPIINIT, SPIIN, SPIOUT.
-
- Interrupt programming
-
ON INT0/INT1/TIMER0/TIMER1/SERIAL, RETURN, ENABLE, DISABLE, PRIORITY
SET/RESET, COUNTERx, CAPTUREx, INTERRUPTS, CONFIG, START, LOAD.
-
- Bit manipulation
-
SET, RESET, ROTATE, BITWAIT.
-
- Variables
-
DIM, BIT, BYTE, INTEGER, WORD, LONG, SINGLE, STRING, DEFBIT, DEFBYTE,
DEFINT, DEFWORD.
-
- Miscellaneous
-
REM, ' , SWAP, END, STOP, CONST, DELAY, WAIT, WAITMS, GOTO, GOSUB,
POWERDOWN, IDLE, DECLARE, CALL, SUB, END SUB, MAKEDEC, MAKEBCD, INP,OUT, ALIAS,
DIM , ERASE, DATA, READ, RESTORE, INCR, DECR, PEEK, POKE, CPEEK, GETRC5.
-
- Compiler directives
-
$INCLUDE, $NOINIT, $BAUD and $CRYSTAL, $OBJ, $SERIALINPUT, $SERIALOUTPUT,
$ROMSTART, $RAMSIZE, $RAMSTART, $MONSTART, $IRAMSTART, $DEFAULT XRAM, $ASM-$END
ASM, $LCD.
-
- String manipulation
-
STRING, SPACE, LEFT, RIGHT, MID, VAL, HEXVAL, LEN, STR, HEX
To create a program takes just a few steps :
- Write the program in BASIC
- Compile it to fast machine binary code
- Test the result with the integrated
simulator(with additional hardware you can simulate the hardware too)
- Program the chip with one of the integrated
programmers.
(hardware must be purchased separately)
The program can be written in a comfortable MDI color coded editor.
Besides the normal editing features, the editor supports Undo, Redo,
Bookmarks
and block indention.
The simulator let you test your program before writing it to the uP.
You can watch variables, step through the program one line at the time or run to
a specific line, or you can alter variables.
To watch a variables value you can also point the mouse cursor over it.
A powerful feature is the hardware emulator, to emulate the LCD display, and
the ports.
The LCD emulator also emulates custom build LCD characters!
When you are done with the simulator it is time to program the chip using one
of the supported programmer drivers.
The program, documentation and samples are in English.
Pricing
[an error occurred while processing this directive] |
